Last Updated on
We bring the best benchtop band saw to conduct off the extreme and complex tasks awarded to you to go with extraordinary quality, and your power increases with having the right tool the folks are looking for.
The power tooling industry is so filled to the brink with some impressive equipment for seamlessly working your butt off, conversing you a lot of labor, a lot of hassle, and a lot of time plus expenses to knock down the more significant projects within days.
Even though there are multiple alternatives (some old-dated mechanisms), but still, they have been so outdated that anyone still practicing them would get labeled as the illiterate and old-fashioned folks who do NOT know the extreme progress is happening in every industry, and the tooling industry has not been spared as well.
Think of adopting the newest technology and just leave behind the old tactics one and for all.
Well, the benchtop band saw is best used to chop and cut down the thick and more prominent lumbers in curves and piercing into the smaller pieces to consume within the woodworking projects.
Get known to determine what kind of woodworking tasks you got and which ones of the diminutive and affordable benchtop band saw would work in your case.
Designed best to cut the irregular shapes, our extensive research to list on the best ten best benchtop band saw would lessen the worries because they are not generally found in your local market, and from the single place but thanks to the internet, that all goes to be the seamless process to purchase one-off and get delivered on your doorstep in a matter of days without going back and forth.
List of best benchtop band saw — Updated picks of 2020!
1. WEN 3939T
Not ALL power tools are powerful enough, and NOT the design can be a detrimental aspect to take a good feel of the power.
So, it is best to know and get to understand how powerful WEN 3939T is as we would do that for you in kind, complete detail.
This ultimate benchtop band saw brings the ultimate cutting performance to get your required lumber and log cut into the small pieces in no time. With the power of 2.8 amp motor, which crazily rotates the blade to well over 2,460 feet within a minute and you can expect how fast your longer-sized logs would get cut despite their sizes.
Able to make the deep cut around 3-⅝ inches with the width of over 9 inches as the extended 62 inches blade with the thickness of ⅛ inches to up to ⅜ inches with loading the lumber logs fitted on 12 x 12 inches of the work table to ready them for the cut and even the angled cuts to about 45 degrees would be done with no issues.
Integrated dust port and the fence loaded with a miter gauge makes the job perfectly precise and clean, and the carrying handle would make you able to lift and change the place.
Design for the best job site bench top band saw, this WEN 3939T would not get away quickly out of your mind.
- Faster blade rotation
- 62 inches long blade
- Efficiently cuts through lumber logs into pieces
- Needs to adjust the blade to increase tension to gain high speed
2. SKIL 3386-01
This ultimate 9 inches benchtop band saw brings you the accurate and straight cuts even though how long you operate this SKIL 3386-01 that comes with the sharpened blade bearing 6 TPI (teeth per inch) that would never turn you down let it be the wood or metal.
And having the motor with 2.5 amps, which generates around no-load 2,800 RPMs to cut through the irregular shapes which the band saws are best designed for.
It comes with a rip fence along with a miter gauge that takes up the pieces to remain accurately straight to get cut with precision. In contrast, the miter gauge delivers the accuracy to make the irregular crosscuts to their proposed sizes, and nothing will ruin the job at all if you happen to understand reading the measures. And when you do, you are all good coming up with the finest cuts!
Even for the angled cuts, it comes with the appropriate rack and pinion table to adjust the way you want. Get the right angle coupled with the height for the proposed cuts that you deem for as it best works to put up the cuts cross-joining the ends together.
With the articulating LED light placed right on the work, the table would bring you enough illumination to add into the darkened areas to concentrate on the cut lines so that you do not work through guesses.
Dedicated dust port with 1-½ inches to throw out all with attaching the vacuum to clear out the mess when the workday calls off.
Bigger table with 11-¾ inches and maximum cutting capacity of 3-½ inches with adequate throat capacity and the variety of blade types to add into; this SKIL 3386-01 would never disappoint you.
- 6 TPI blades
- Enough wider dust port
- One hp motor
- Do not try on the metal
3. POWERTEC BS900
Just like the name, POWERTEC BS900 is the name of power.
Features with miter gauge and right 62 inches blade with ¼ inches width delivers the proposed results you, so the demand for along with other notable functions to cut through the irregular shapes up to 3-⅝ inches and widened to 9 inches to rip through the lumbers trimming down into thinner pieces.
Absolute and patented blade guard with the appropriate adjustment that delivers the advantage to quick and more effortless blade replacement with the right tracking window in place for the blade and every wastage slipping into the dust port to keep the work area cleaner and clearer even though you collect the wastage after the whole workday.
Get the precise angled cuts with tilting the table that comes with a rack and pinion to raise and lock on the required angle from 0 to 45 degrees—and powered by ½ hp with 2.5 amp motor producing 1,725 RPMs to cut the assortment of wooden projects this POWERTEC BS900 is best designed for.
With the aluminum die-cast table to load the variety of woods, long and short with the maximum depth of cut of 3-⅝ inches always at your service to get your best pieces cut out of the lumber to shape up the designs you are working on.
Align the blade whenever you need to through the viewable window and the quick-release blade tension lever to release off the blade before changing it so that you do not have to play rough in releasing the blade, which can, of course, turn out to become a tedious job for you.
- Bevels to up to 45 degrees
- Emits over 1,725 RPMs
- ½ hp motor with 2.5 amp power
- Does not come with dust port
4. Grizzly Industrial G0555
The benchtop band saws are considered to be well-adopted by professional and commercial use. However, still, the industrial-grade benchtop band saw is different and convenient to cut down things for you and that too, all day long.
Though the specification and the functionalities this Grizzly Industrial G0555 would still be like any other benchtop band saw but the design is capable of taking up all the load, and the wear and tear would not damage the unit.
Spacious cutting capacity at the throat touches to around 13-½ inches that enables it to load up the bigger logs for seamless cutting quickly. And the maximum cutting height of 6 inches ensures this claim is a tested and factual state.
Blade guides wearing on the upper and lower ball-bearings that require to be greased for the continuous operation and the produced heat would not degrade the performance, and that is for sure!
Happens to have the built-in miter gauge along with ⅜ inches of the blade and the aluminum fence to keep everything handy and together jotting down every single piece in mere seconds as it comes with 1hp of motor pre-wired to work with 110V ~ 220V and single-phase keeping the load at the lowest end when running at the maximum power.
Tilting table to the right side to up to 45 degrees and 15 degrees to left with the blade running at the speed of up to 1,500 to 3,200 RPMs getting even the complex jobs done in no time.
- Adjustable speed with motor matching to 1,500 RPMs to 3,200 RPMs
- Pre-wired to work with 110V ~ 220V
- Gets to bevel down to 45 degrees for angled cuts
- Somewhat expensive in the price
5. Rikon 10-305
Another unusual name in the benchtop band saw comes right form Rikon 10-305, the one renowned brand which is known for manufacturing the high-end benchtop band saw to rely upon projects to projects without it refusing to deliver the remarkable results every day.
The sturdy and larger work surface by 12-½ inches and the cast-iron table ranging to 13-¾ inches claim to have provided such a feature that is hardly seen with any other benchtop band saw.
It is backed by the powerful yet robust motor with the power of 1/3 hp that does emit the high revolving ability to swiftly cut through the pieces along with the rip fence to retain the utmost accuracy with tilting to 45 degrees for the angled cuts and integrated blade tension knob for conveniently releasing the blade which would take merely the seconds.
Embedded dust port of 2-½ inches makes your job super easier to clean out all the wastage, which gets collected in the line, which you can remove from attaching the vacuum.
Designed for delivering only the best results, this absolute benchtop band saw from Rikon would never say a NO to doing its job with the maximum performance. And the safety paddle to turn the machine on and off is more convenient than anything to NOT reach for the electric post every time.
- Bigger cast-iron made table
- The best brand is known for manufacturing best benchtop band saw
- Little expensive
6. WEN 3975T
Maybe you might be surprised by what happened to this kind of the benchtop band saw because that does not look like an inch closer to the previously-brought benchtop band saws.
But this exclusive WEN 3975T is kept with the same design because of one thing; it does not cut anything but ONLY the metal and its pipes to the appropriate sizes which you demand.
Super convenient to adjust the blade cutting speed from 125 to over 260 feet per minute accordingly to match with a variety of metals without destroying the blades and damaging the sharpened teeth embedded on the blade.
To have the maximum output from this benchtop band saw for metal requires adjusting the beveling blade to effectively cut through 0 to 60 degrees, which would help you to joint up the corners through the angled cut pieces.
Able to cut the metal pipes in 5 inches diameter or do the rectangular materials from the sizes of up to 5 x 4-⅞ inches to match with the cuts that demand by the tasks you are working on.
The compact design to such a site with having the powerful 4.5 amp motor works great to cut down the steel pipe of 24 square inches in a single pass, makes it super portable to take along with you on the job site every day.
- Cuts through metals and woods
- Bevels deep down to 60 degrees
- Powerful 4.5 amp motor
- A bit on the expensive side
7. Delta 28-400
The frame with all heavy-duty steel and the unique design brings you the superior features coupled with the ultimate finish and the aluminum-backed trunnion table supporting and increasing the longevity and durability to the multiple folds.
Backed by one hp and supported to work with 110 V to 230V TEFC and one-phase motor adjustable to run through two speeds with 1,620 FPM and 3,340 FPM to cut through wood and the hard-non-ferrous metal by setting up the right speed as the faster one would cut down the metal with ease.
It comes with a two-speed pulley to lower the tensioning of the blade and tilting to over 45 degrees on the right for getting the angled cuts done effectively.
Much bigger cast-iron table ground to little oversized 15-¾ inches to 18-⅞ inches loaded with t-slot miter gauge takes up everything conveniently to cut down the metal and wood with much precise accuracy than ever.
Aluminum wrapped around the upper area with the rubber-coating and integrated nine spokes wheel on the lower end comes with the precise balance for ultimate blade tracking and following the cuts to keep coming straight.
More significant and durable, this is what Delta 28-400 is known for, AND that will prove when it makes the first day at the job!
- One-phase motor
- Adjustable dual speed from 1,620 to 3,340 FPMs
- Cast-iron work table
- Highly expensive but feature-rich to maximum!
Angled woodworking made no sweat with owning this XtremepowerUS that comes with wider nine inches of benchtop loaded with the even-powerful motor with the ultimate power of 3 amperes and the blades to go tilting and beveling to up to 0 to 45 degrees with the adjustable knob to get the finest angled cuts in a short time.
Bigger and broader work table with 11-¾ inches x 11-¾ inches to keep the bigger-sized logs stretched with having enough room to conduct the best work out of every turn.
Comes with the band saw takes up every piece of wood, whether in the flat form and the sturdy surface, would not slip the things out.
And keeps the dust and all the debris formed on the band saw away from getting in the way slipping right into the dust port, which can be retrieved later by attaching the vacuum cleaner and sniffing out all to clear the port for tomorrow’s work.
With the maximum cutting height of 3-½ inches with the maximum width of 9 inches takes up, the more significant 62 inches of blades revolving to the speed of 2,340 FPM will bring you only the best results to form and cut the bigger logs in your proposed sizes to fit into the projects.
- More powerful motor with 3.0 amp
- Integrated dust port
- Enhanced 2,340 FPM
- Highly affordable benchtop band saw
- Does not come with the rip fence
9. Kaka Industrial BS-85
Another compact and steel-focused benchtop band saw that it does only one thing; cut down the steel to the required pieces.
This portable band saw features an aluminum-casting structure that keeps it super lightweight and stabilized to a greater extent, increasing the signs of durability and performance that is hardly experienced from many other band saws available in the market.
With having the stepless speed regulated to achieve its maximum speed in no time, this helps to seamlessly cut the steel without stopping and degrades the speed as it cuts through.
As the band saw bows down, this goes into the rotation to achieve the beveled angles from 0 degrees to 45 degrees to craft the cuts required to join the pieces together to complete the complex tasks where not only the straight cuts would do the job.
No reason, this Kaka Industrial BS-85, despite the compact size, would bring the industrial-grade results to every single job you use this unit for as it got the motor emitting the power of 1.5 hp with enough blade speed to conveniently enter into the metal and steel materials without leaving the marks of rough entry.
- Best metal cutting benchtop band saw
- Portable design
- A bit expensive in the price
10. WXH Mini
And this goes our last in the list of the best benchtop band saw that is too small to hold in your hands quickly.
Despite the size, the performance does not degrade to be called any lower than the traditional benchtop band saws.
With having over 60mm cutting height and the adjustable beveling scale to 45 degrees combine to make WXH Mini an entirely small and portable benchtop band saw ready to deliver only the results that you expect.
Having a more extensive 8 inches work table that allows you to put up from wood to metal with the stabilized form with minimizing the chance of slipping off of it.
Cuts not just the hardwood but that goes for steel, aluminum, copper, brass, and plastic with cutting straight and into angles with loading the pieces into a rank and pinion table to get adjusted in a matter of seconds to the required angle position.
Throat depth of over 190mm sticks in the longer pieces that go way longer to insert even larger pieces ready to cut down into sections to become part of your projects.
- Best portable benchtop band saw
- Sufficient cutting capacity
- Cuts through a variety of materials
- Little on the expensive end
Finally, we conclude our list of top 10 best benchtop band saw where we collected up to 10 units for you to bring on your jobsite.
Guaranteed to deliver the ultimate and most exceptional results, these benchtop band saws are compiled up to work beyond their power to get your commercial projects completed with quality and way before the time.
Varies by the price and the features, these benchtop band saws come with extensive details clearing up your mind to pick which one would suit as per the set requirements.
So, shop one and forget the headache running with the low-end devices adding the fuss at work!